Looking for the best concrete fire table to elevate your backyard gatherings? Look no further than the Millenia Rectangle Gas Fire Pit Table.
Millenia is hand cast from high-performance Glass Fiber Reinforced Concrete (GFRC). GFRC is lighter compared to materials like marble and stone but provides the same level of durability while giving a natural handcrafted look. On the other hand, due to the glass fibers mixed in the GFRC helping to reinforce the concrete, it's stronger than MGO (Magnesium Oxide) Without paint in GFRC and with 3 coats of clear sealer applied making it colorfast to withstand the outdoor elements. The trough burner design of Millenia fire table creates a desirable curtain flame.
Product Available in Canada only. Price listed in U.S. Dollars.
As a manufacturer, we design each product with security in mind. Millenia is equipped with a CSA-certified, thermo-couple regulated 50,000 BTU stainless burner and convenient electronic ignition (1.5v battery powered). It also features a flame-out safety auto shut-off system.
Body construction: handcrafted glass-fiber reinforced concrete
Table dimensions: 30" wide, 48" long ,15" high with and 12" high without the optional legs
Burner pan size: 30" x 12", rectangle, stainless steel
Burner ring size: 24" long, linear, stainless steel
Bottom clearance: approximately 7" high from the ground to the bottom center of the burner assembly. There is empty room around the burner assembly.
Gas output: 50000 btu max
Table weight: 140 pounds
A 10-foot hose with a 3/8" flare fitting at the end for natural gas connection. Or a 10-foot hose with a standard connection for a propane tank. If you're connecting to an underground stub-up and needs a shorter hose, please leave a note at the checkout page.
A weatherproof canvas cover
Optional aluminum legs raise the table 3 inches off of the ground allowing plenty of ventilation for installation on composite decks.
Around 50 pounds of fire media of your choice
Product arrives in 2-3 business days. Available in Canada only.
Use Coupon Code Pyro24 at checkout Expires December 8th.
Can I put a PyroMania fire table on a wood or synthetic deck?
Yes, PyroMania fire tables have a heat shield incorporated underneath the burner pan and can be placed on a wood or synthetic deck.
If my gas line is underground can be connected under the unit hiding the connection? Or does it have to be outside the table?
We designed our fire tables with both types of installations in mind. If you have an underground gas line, it can be connected inside the cavity of the fire table through the bottom. All Pyromania Series fire tables have a supply hose pre-installed and connected to a bulkhead connection which is discreetly located underneath the bottom side. The hose can be disconnected, and the bulkhead fitting can be removed from the body and relocated inside the fire table cavity. Then the hose can be reconnected to the bulkhead fitting on one end and connected to your gas line "stub-up" at the other end.
Should I have to install legs on PyroMania fire pits to allow ventilation inside the fire pit?
Legs are optional for PyroMania firepits, but fresh air must be able to pass under the fire table to safeguard against residual gas accumulation. Failure to allow proper ventilation may cause a fire or explosion. If installing PyroMania fire table without the optional legs, it should be placed on a hard level surface that allows proper ventilation through the ½” gap incorporated into the bottom. If the installation method blocks the incorporated gap, then an alternative method for allowing ventilation would be required.
Required minimum clearances to combustible materials:
Sides and back - 48 inches. Top - 72 inches.
Hide your propane tank with one of these two cover options.
Hermit Propane Tank Cover : Shop Here
Intorvurt Propane Tank Cover: Shop Here
$1,685.77 $1,999.99
| /
